BGXMR - LIQUID POLISH
- MSDS: BGXMR
- Manufacturer: INDUSTRIAL FLOOR FINISHES
- Product Name: LIQUID POLISH
- National Stock Number: 7930-00-266-7142
Product Identification
Product ID:LIQUID POLISH
MSDS Date:05/19/1987
FSC:7930
NIIN:00-266-7142
MSDS Number: BGXMR
Responsible Party
BEDFORD, MA 01730
US
Emergency Phone: 508-667-5161 OR LOCAL POISON CENTER
Info Phone: 508-667-5161
Preparer: T. PITROLFFY
Cage: INDUS
Contractor
Telephone: 1-617-667-5161
Cage: INDUS
Ingredients
STODDARD SOLVENT
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 17%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM; 9293
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE:PRIMARY EYE AND SKIN IRRITANT
WITH CONTACT. CHRONIC: NOT SUFFICIENT DATA.
Effects of Overexposure:HEADACHE,DIZZINESS AND NAUSEA.
First Aid
First Aid:EYES: FLUSH WITH WATER; SKIN:WASH WITH SOAP AND WATER, APPLY
SKIN CREAM. INHALATION:REMOVE TO FRESH AIR, RESTORE BREATHING, CALL
PHYSICIAN. INGESTION:DRINK WATER OR MILK, DO NOT INDUCE VOMITING.
CALL POISON CONTROL.
Fire Fighting
Flash Point Method:TCC
Flash Point:104F-40C
Lower Limits:0.8
Upper Limits:6.0
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WATER MAY BE USED TO COOL CONTAINERS TO
PREVENT PRESSURE BUILD-UP OR AUTO-IGNITION.
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT. CLOSED CONTAINERS MAY
EXPLODE IF EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:REMOVE SOURCES OF IGNITION, SPRINKLE WITH
ABSORBENT. FOG WITH WATER, FLUSH OR SCRAPE INTO RETAINING AREA OR
CONTAINER. INCREASE VENTILATION. AVOID BREATHING VAPORS.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS AND OPEN
FLAME. USE ADEQUATE VENTILATION. AVOID PROLONGED OR REPEATED
CONTACT. KEEP CONTAINER CLOSED.
Other Precautions:AVOID STATIC BUILD-UP. KEEP AWAY FROM CHILDREN.
Exposure Controls
Respiratory Protection:SELF CONTAINED BREATHING APPARATUS FOR
CONCENTRATIONS ABOVE TLV.
Ventilation:LOCAL AND MECHANICAL EXHAUST FROM LOWER LEVELS.
Protective Gloves:USE RUBBER GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:EYE BATH, SAFETY SHOWER, PROTECTIVE CREAM.
Supplemental Safety and Health
NONE
Chemical Properties
Boiling Pt:B.P. Text:215F
Vapor Pres:2
Vapor Density:3.8
Spec Gravity:1.1
Evaporation Rate & Reference:
Appearance and Odor:GREEN CREAMY LIQUID.
Percent Volatiles by Volume:74
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:HEAT,SPARKS,OPEN FLAME AND FIRE.
Hazardous Decomposition Products:THERMAL DECOMPOSITION PRODUCES FUMES,
MAY YIELD CARBON MONOXIDE.
Disposal
Waste Disposal Methods:INCINERATE OR DISPOSE OF IAW LOCAL,STATE AND
FEDERAL REGULATIONS. EMPTY CONTAINERS MAY RETAIN FUMES. DO NOT
EXPOSE TO HEAT OR FLAME.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.